2" x 72″ Cork Sanding Belt – 6 Pack for Knifemakers Cork / Ungritted Cork
Add 2 more to save 10%.
Available in stock (49988)
Check return eligibility and fees
A 2" x 42" belt grinder is where a lot of people make their first knives, and this two-pack is the finishing belt for that machine: the Jet J-41002 our original listing named, the Palmgren 2" x 42" and the other bench grinders built for this size. After the coated belts have ground the bevels, a non-woven belt evens the flats into a clean satin, cleans scale and heat colour off a blank, and softens the corners on guards and handle hardware without changing a dimension.
We sell this size two belts to a pack so you can try a grade without committing to a box. The grades are colour-coded: Coarse is brown, Medium is maroon, Very Fine is blue and Ultra Fine is grey. Converted in Anaheim, California.
Because this is a two-pack, most people buy one grade at a time. Here is how to pick.
For handle materials, Medium then Very Fine gives a clean matte on G10, micarta and other fiberglass laminates without the fuzzing a coated belt can leave. On brass and copper fittings use Very Fine or Ultra Fine only.
| Grade / colour | Use it for | Notes |
|---|---|---|
| Coarse / brown | Scale, rust, heat colour, stripping | Roughly 40-60 grit; removes some material |
| Medium / maroon | Blending after 120 grit, corners, tint | Roughly 80-120 grit |
| Very Fine / blue | Working satin on blades, #4 on fittings | Roughly 180-240 grit |
| Ultra Fine / grey | Fine satin, pre-buff | Roughly 320-400 grit |
The grit numbers describe the scratch the web leaves, not how fast it cuts. A non-woven belt of any grade removes far less than a coated belt of the same number, which is why it can refine a ground blade without washing out a crisp plunge line if you keep the pressure light.
This is not a 2" x 72" belt; if you have a dedicated knife grinder, see our 2" x 72" surface conditioning belts. To mount, release the tension, slip the belt over the wheels with any direction arrow on the inside pointing the way the belt runs, re-tension and adjust tracking until the belt sits centred on the platen. The web is thicker than cloth, so a small tracking correction is normal when switching from a coated belt. Other sizes can be made to order in about three days.
Use it for
Don't use it for
| Size | 2" x 42" |
|---|---|
| Type | Non-woven surface conditioning belt |
| Abrasive grain | Aluminum oxide in resin-bonded nylon web |
| Backing | Reinforced scrim |
| Grades offered | Coarse (40-60), Medium (80-120), Very Fine (180-240), Ultra Fine (320-400) grit equivalents |
| Colour code | Brown, maroon, blue, grey |
| Pack quantity | 2 belts of one grade |
| Wet or dry | Dry; light lubricant acceptable on aluminum |
| Verified fit | Jet J-41002, Palmgren 2" x 42" belt grinders |
| Converted in | Anaheim, California |
| Custom sizes | Made to order in about 3 days |
Yes. The Jet J-41002 runs a 2" x 42" belt, as do Palmgren 2" x 42" grinders and other bench machines built for this size, and this non-woven belt mounts the same way as your coated belts. Because the web is thicker than cloth, expect to adjust the tracking knob slightly after fitting it.
Because most 2" x 42" owners want to try a grade before buying a box. Two belts of one grade let you see how Medium or Very Fine finishes your blades on your machine. If you settle on a grade and use it regularly, call 714-646-3299 or email sales@maverickabrasives.com for quantity pricing.
Very Fine (blue). Take the blade to 220 grit with coated belts, then run the blue belt lengthwise with light pressure for an even, directional satin. If you stopped at 120 grit, use Medium (maroon) first. Ultra Fine (grey) gives a finer satin or a base for buffing to a mirror.
Coarse (brown) removes light scale, heat colour and rust from a blank and cleans the surface before grinding. It is the one grade that removes real material, so keep the blank moving. Heavy, thick scale comes off faster with a coated belt first, followed by Coarse or Medium non-woven to even the surface.
No. Both are 2" wide but the 72" belt is for dedicated knife grinders such as the Grizzly G1015 and KMG-style machines, and it will not fit a 42" bench grinder. We stock 2" x 72" surface conditioning belts separately. Measure the belt you are replacing if you are unsure which machine you have.
Brown is Coarse, roughly a 40-60 grit finish. Maroon is Medium, roughly 80-120. Blue is Very Fine, roughly 180-240, the working satin grade. Grey is Ultra Fine, roughly 320-400, for the finest satin before buffing. The numbers describe the scratch pattern; the removal rate is far lower than a coated belt of the same grit.
Orders over $200 ship free, and unused belts in their original packaging can be returned within 30 days. Two-packs are a convenient add-on to a coated belt order; if you want a box quantity or a mixed set of grades in 2" x 42", contact us for pricing. Custom belt sizes are made in about three days.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.