Grind the blade
The four SHREDDER ceramic belts cover 36 through 120 grit. Choose the starting grit for the material you need to remove, then refine the scratch pattern as your work requires.
FOR YOUR KNIFE-MAKING BENCH
Start with a coordinated belt selection for blade grinding, handle shaping and contour work. This kit brings five belt types together so you can choose by the job in front of you.
Available in stock
Check return eligibility and fees
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
ONE KIT. FIVE BELT TYPES.
Use ceramic for steel stock removal, X-weight aluminum oxide for handle work, flexible belts for contours, and medium surface conditioning for blending. Match the belt to the task instead of treating every belt as another step in one fixed sequence.
See exactly what is included
One belt of every grit or grade listed below. Nine belts measure 2" × 72"; the two scalloped-edge belts measure 1" × 72".
2" × 72" · 36, 60, 80, 120 grit
Steel stock removal and grinding progression.
2" × 72" · Medium grade
Surface blending after the required abrasive grinding.
2" × 72" · 40, 120, 220 grit
Shaping and refining handle materials.
2" × 72" · 320 grit
Flexible sanding and finer contour work.
1" × 72" · 120, 220 grit
Narrow access around handle curves and tight contours.
The two 1-inch belts are intentional: they provide a narrower contact area for contour work. They are not 2-inch belts.
CHOOSE BY THE JOB
The four SHREDDER ceramic belts cover 36 through 120 grit. Choose the starting grit for the material you need to remove, then refine the scratch pattern as your work requires.
Use the X-weight aluminum oxide belts for handle shaping and refinement. The kit includes 40, 120 and 220 grit so you can adjust the cut to the stage of the job.
Use the 320-grit J-flex belt where flexible contact is needed, and the two 1-inch scalloped belts for narrower handle contours. The medium surface-conditioning belt provides a separate blending option.
This is a belt-selection guide, not a machine setup or safety procedure. Follow your grinder and belt instructions. Inspect the surface between grits; a conditioning belt is not a substitute for removing deep grinding scratches.
Check for a 72-inch belt loop and a setup intended for 2-inch-wide belts. To use the complete kit, your grinder must also support safe tracking and use of 1-inch-wide belts. A matching nominal size alone does not establish compatibility.
Shop individual 2" × 72" belt optionsA maker with a compatible grinder who wants a mixed selection for blade and handle work.
You need a different loop length, only one grit, or a specific abrasive in larger quantities.
There are 11 belts: four SHREDDER ceramic, one medium surface-conditioning, three X-weight aluminum oxide, one 320-grit J-flex aluminum oxide, and two J-weight scalloped-edge aluminum oxide belts. Each listed grit or grade is supplied once.
No. Nine belts are 2 inches wide and two scalloped-edge belts are 1 inch wide. Every belt is 72 inches long. Check that your grinder can safely run both widths before ordering.
Ceramic: 36, 60, 80 and 120. X-weight aluminum oxide: 40, 120 and 220. J-flex aluminum oxide: 320. One-inch scalloped aluminum oxide: 120 and 220. The surface-conditioning belt is Medium grade, not a numbered grit.
X-weight and J-flex describe different cloth backings. This kit pairs X-weight aluminum oxide belts with handle-shaping work and a flexible J-flex belt with contour and finer sanding work. Choose the backing as well as the grit for the task.
Fit must be checked against your machine instructions. The grinder must accept a 72-inch belt loop, the intended 2-inch working width, and the two narrower 1-inch scalloped belts. Confirm tracking and the approved setup with your grinder manufacturer.
No. The result depends on the work material, previous scratches, technique and subsequent finishing steps. The included 320-grit belt and Medium surface-conditioning belt do not promise a mirror finish. Choose any additional finishing or sharpening materials for your intended result.
Yes. Use Maverick’s 2 x 72 sanding-belt listing to choose available abrasive and grit combinations. Match the width, length, backing and grit of the belt you want to replace; this kit also contains two 1-inch scalloped belts.
No. Maverick’s automatic volume-pricing tiers do not apply to this kit. The quantity selector controls how many complete 11-belt kits you order.
BUILD YOUR BELT SELECTION
Check your grinder fit, review the 11 included belts, then start with one kit.