Two belts per pack
Both belts use the same selected abrasive material and grit.
6-INCH × 89-INCH EDGE-SANDER BELTS
6" x 89" Sanding Belts for Edge Sanders
Two belts per pack with aluminum oxide, zirconia, and ceramic choices for compatible 6-inch × 89-inch edge sanders.
4.9 / 5 from 107 reviews- Every selected variant is a two-pack of 6-inch × 89-inch belts.
- Choose the abrasive material for wood sanding or metal stock-removal work.
- Available grits span 36–400, depending on abrasive material.
Regular price
$29.00
Sale price
$29.00
Regular price
Shipping calculated at checkout.
Available in stock
Which machines use this sanding-belt size?
Choose material, then grit
Aluminum oxide has the broadest range; zirconia and ceramic are offered in coarser removal ranges. Use the live selector for valid combinations.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
KEEP EDGES SQUARE AND THE BELT TRACKING
Match the belt to the machine and the edge-sanding stage
Confirm the machine requires a 6-inch × 89-inch belt, then choose the abrasive and grit for the material, stock condition, lateral pressure, and finish target.
21 current variants
Material, grit, price, and availability update with the live selector.
Customer-verified rating
4.9 out of 5 from 107 reviews. Available review content appears below.
DECISION GUIDE
Which 6" x 89" edge-sander belt should you choose?
Use aluminum oxide for the broadest progression and select zirconia or ceramic when the listed coarse-range construction better fits the metal-removal job.
Aluminum oxide
Available from 36–400 grit for wood, general fabrication, and progressive edge refinement.
Zirconia
Coarse and medium choices for heavier removal on compatible metalworking processes.
Ceramic
Coarse and medium choices positioned for demanding stock removal on steel or stainless when the machine and process are appropriate.
Which machines use this sanding-belt size?
The manufacturer references below identify belt dimensions for these models. Check your exact model, revision and installed configuration before ordering.
| Machine model | Manufacturer-listed belt size |
|---|---|
| Grizzly G0563 | 6 × 89″ |
| Shop Fox W1730 | 6 × 89″ |
| JET OES-689-BLK | 6 × 89″ |
This listing supplies the belt size shown in the product title. Model names are a size reference, not a guarantee for every machine configuration. Confirm width, loop length, tension range, joint, backing and approved use in your machine manual.
These are belt-size references. A matching size does not approve every abrasive or work material. Follow the exact model manual; some woodworking sanders prohibit metal or wet sanding.
HOW TO USE IT
Track the long belt before applying edge pressure
Edge-sander setup and tracking affect belt life, edge accuracy, and finish quality.
- 01
Disconnect power and confirm the machine requires a 6-inch × 89-inch belt.
- 02
Inspect the belt joint, backing, edges, and abrasive surface before installation.
- 03
Follow any direction marking and set tension and tracking according to the machine manual.
- 04
Run the belt clear of the workpiece and verify stable tracking across the full machine cycle.
- 05
Apply controlled lateral pressure and use the collection and guarding required for the material.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 6-inch × 89-inch edge or oscillating sanders
- Squaring and refining wood edges
- Metal edge grinding with the matched abrasive
- Progressive sanding through available grit stages
- Bidirectional use when allowed by the delivered belt and machine
Do not use it for
- A machine requiring another width or length
- A belt with a damaged joint, backing, or edge
- Excess side pressure that overheats the work or belt
- Operation without guards and required dust or spark collection
- Wet sanding without complete belt-and-machine approval
PRODUCT FAQ
Questions before you choose?
What comes in each 6-inch x 89-inch order?
Each selected variant is a two-pack. Both belts use the material and grit shown in the selector.
What machines use a 6-inch x 89-inch belt?
This size is used on compatible edge and oscillating sanders. Confirm both the 6-inch width and 89-inch length in the machine manual before ordering.
Which abrasive material should I choose?
Aluminum oxide has the broadest grit range and is the general-purpose choice. Zirconia and ceramic are offered in coarser ranges for heavier stock removal on compatible metal processes.
Which grit should I use for wood edges?
Use 36–60 for heavy correction, 80–120 for leveling and blending, 150–220 for finish preparation, and 320–400 for finer refinement. Start with the least aggressive grit that will do the work.
Can these belts run in either direction?
The current product record describes the belts as bidirectional. Follow any directional marking on the delivered belt and the machine manual if either specifies a direction.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. Return eligibility, approval requirements, restocking fees, and return-shipping costs are explained in the return policy. Review the policy before ordering.
READY TO CHOOSE?
Fit the edge sander, then choose the abrasive
Confirm 6" × 89", select the material, and choose an available grit from the live selector.
