Two belts per pack
Both belts use the selected aluminum oxide grit.
43-INCH × 60-INCH ALUMINUM OXIDE BELTS
43" x 60" Aluminum Oxide Wide Sanding Belts
Two-belt packs in aluminum oxide with nine live grits for compatible 43-inch × 60-inch wide-belt sanders.
5.0 / 5from 22 reviews- Every option is a two-pack of 43-inch × 60-inch belts.
- The current selector offers aluminum oxide only, from 36 through 320 grit.
- Original Grizzly, Shop Fox, Cemco, and Timesavers references are retained.
Regular price
$136.22
Sale price
$136.22
Regular price
Shipping calculated at checkout.
Available in stock
Choose one of the nine live aluminum oxide gritsThe older description mentioned zirconia, but zirconia is not a live option on this product. Price and availability update with the selected aluminum oxide grit.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
CURRENT SELECTOR, CLEARER CHOICE
Use the live aluminum oxide range for leveling through fine preparation
This page now resolves the conflict between the old description and the actual variants: the product currently sells aluminum oxide belts only. Choose grit by the starting surface and required finish.
Nine current grits
36, 60, 80, 100, 120, 150, 180, 220, and 320 grit are listed.
Customer-verified rating
5.0 out of 5 from 22 reviews. Available review content appears below.
DECISION GUIDE
Which 43" x 60" grit should you choose?
Start with the least aggressive grit that will correct the surface and use intermediate stages to remove the prior scratch pattern.
Heavy leveling
The coarsest current choice for substantial stock removal on a validated setup.
Coarse and intermediate sanding
Use to level and begin reducing the scratch from the initial cut.
Finish preparation
Use progressively for general refinement before the required coating or finishing step.
Fine refinement
Use only after the prior scratch pattern is controlled.
ORIGINAL MACHINE REFERENCES, RETAINED
Which machines are associated with this belt size?
These names come from the original product page and help identify likely applications. They are not fit guarantees; confirm the exact belt width and loop length in the machine manual.
Grizzly G0581
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Shop Fox W1756 and W1757
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Cemco 1143
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Timesavers models that specify a 43 × 60 belt
Verify the exact machine revision, belt dimensions, backing, joint, and operating requirements before ordering.
Fit check: A manufacturer or model-family name is not enough. Match both dimensions exactly and check any backing, joint, direction, tension, and speed requirements.
ABRASIVE AND PROCESS NOTES
What original technical guidance was retained?
The important material distinctions, grit ranges, bidirectional note, and troubleshooting links remain part of the page.
Broad-range general-purpose choice
Where listed, cloth aluminum oxide covers coarse removal through finer finishing stages. Selected products also offer paper aluminum oxide in a narrower range.
Coarse and medium stock removal
Where listed, zirconia is concentrated in 36–120 grit. The 43 × 60 product is the exception in this batch and currently offers aluminum oxide only.
Follow the delivered belt and machine
The original records describe these wide belts as bidirectional. A direction arrow or machine instruction on the actual product controls if present.
Remove the prior scratch before moving finer
Start with the least aggressive grit that will do the work, inspect the full surface, and use intermediate stages appropriate to the required finish.
HOW TO USE IT
Install and test the belt before production sanding
Machine setup controls belt tracking, finish consistency, and service life.
- 01
Lock out power and confirm a 43-inch × 60-inch belt is specified.
- 02
Inspect the belt face, edges, backing, and joint.
- 03
Install according to the direction, tension, and tracking instructions.
- 04
Run without stock and confirm stable tracking and clearance.
- 05
Test the grit on representative stock with appropriate collection.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 43-inch × 60-inch wide-belt sanders
- Wood stock removal and panel leveling
- General metal sanding with an approved aluminum oxide process
- Progressive sanding from coarse through 320 grit
- Bidirectional use when the delivered belt and machine permit it
Do not use it for
- Ordering zirconia from this product—the live selector does not offer it
- A machine requiring another belt length
- Installing a damaged or poorly tracked belt
- Skipping directly from 36 grit to a fine finish stage
- Wet use without belt-and-machine approval
PRODUCT FAQ
Questions before you choose?
Is zirconia available on this 43-inch x 60-inch listing?
No. Although the older description mentioned zirconia, the current live selector contains aluminum oxide only.
Which grits are available?
The current selector lists 36, 60, 80, 100, 120, 150, 180, 220, and 320 grit.
Which machines are referenced?
The original page references the Grizzly G0581, Shop Fox W1756 and W1757, Cemco 1143, and compatible Timesavers models. Confirm the exact 43-inch × 60-inch requirement.
Can the belt run in either direction?
The original product record describes bidirectional use. Follow any direction marking on the delivered belt and the machine manual if either specifies a direction.
What comes in a pack?
Each selected variant is a two-pack of aluminum oxide belts in one grit.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. The return policy provides a 30-day window for eligible unused items in original condition and packaging. Restrictions and return-shipping costs apply.
READY TO CHOOSE?
Choose the aluminum oxide grit for your 43" × 60" machine
Confirm the exact belt size, choose one of the nine current grits, and review live price and availability.
