Two belts per pack
Both belts use the abrasive material and grit selected in the live controls.
6-INCH × 132-INCH EDGE-SANDER BELTS • 2 PACK
6" x 132" Edge Sander Belts for Wood and Metal
Two matching belts per pack in aluminum oxide, zirconia, or silicon carbide for compatible 6-inch × 132-inch edge sanders.
4.8 / 5from 24 reviews- Two belts in the selected abrasive and grit.
- Twenty-eight live combinations from 36 through 400 grit.
- Original Maverick belt-manufacturing video retained.
Regular price
$41.80
Sale price
$41.80
Regular price
Shipping calculated at checkout.
Available in stock
Choose the grain and grit for the current edge-sanding stageAluminum oxide and silicon carbide cover 36–400 grit. Zirconia is offered from 36–120 grit for more demanding coarse and medium removal.
Couldn't load pickup availability
Secure payment
Payment methods
Available payment methods appear at checkout.
A SIX-INCH EDGE-SANDER BELT NEEDS EVEN SUPPORT
Protect the edge profile with controlled feed, pressure, and tracking
Confirm the exact 6-inch × 132-inch specification, then match the abrasive to the material and finish target. Stable tracking, a sound belt joint, suitable work support, and a planned grit sequence all affect the result.
28 live combinations
Eleven aluminum oxide, eleven silicon carbide, and six zirconia variants are listed.
Customer-verified rating
4.8 out of 5 from 24 reviews. Available review content appears below.
DECISION GUIDE
What should you verify before choosing?
The exact fit, abrasive construction, grit, machine setup, work material, and finish target all affect the result.
36–400 grit general-purpose range
Use for the broadest progression across compatible wood and general-metal work, from shaping through fine preparation.
36–120 grit demanding removal range
A tough coarse-to-medium option, commonly selected for metal stock removal where pressure and heat are controlled.
36–400 grit sharp-cutting range
A hard, sharp abrasive with a different scratch and break-down pattern. Qualify it on the actual substrate and finish system.
Maverick manufacturing video retained
The original product page included a Maverick video about how sanding belts are made. It appears below without adding unsupported performance claims.
ORIGINAL MAVERICK VIDEO
See how sanding belts are made
This manufacturing video appeared on the original 6-inch × 132-inch product page and remains part of the optimized buying guide.
How Maverick Abrasives makes sanding belts
Face, backing, joint, and edges work as one belt
Inspect every new belt before installation. Reject tears, damaged edges, creases, contaminated backing, or a visibly compromised joint, and follow the machine’s direction, tension, and tracking procedure.
HOW TO USE IT
Install, track, and test the edge-sander belt
Use the machine manual for lockout, direction, tension, tracking, guarding, platen or oscillation setup, work support, and collection.
- 01
Lock out power and verify the machine requires a 6-inch × 132-inch belt.
- 02
Inspect the belt face, backing, edges, joint, rollers, platen, and collection path.
- 03
Install in the required direction and set tension and tracking to specification.
- 04
Run without stock and verify stable tracking, oscillation if applicable, and clearance.
- 05
Test representative material with supported feed and inspect the entire edge before production.
Use the guarding, extraction or collection, personal protective equipment, training, and operating procedures required by the machine, abrasive product, work material, and workplace.
Use it for
- Compatible 6-inch × 132-inch edge sanders
- Wood edge shaping and finish preparation
- Qualified metal edge sanding and deburring
- Supported platen or oscillating work allowed by the machine
- Coarse removal through fine scratch refinement
Do not use it for
- A machine requiring another width or loop length
- Using a damaged belt edge, backing, or joint
- Unsupported work or bypassed guarding
- Skipping grits before the prior scratch is removed
- Assuming universal wet use or life multipliers
PRODUCT FAQ
Questions before you choose?
What comes in each 6-inch x 132-inch order?
Each selected variant contains two matching 6-inch × 132-inch belts in one abrasive material and grit.
Which abrasive materials and grits are available?
Aluminum oxide and silicon carbide are listed from 36 through 400 grit. Zirconia is listed from 36 through 120 grit.
Are these belts made by Maverick in California?
The original product record states that the belts are made at Maverick’s Anaheim, California manufacturing facility. The original manufacturing video is retained below.
Can I run these belts wet?
Do not assume wet compatibility from the grain name alone. Confirm the exact belt backing and bond, machine approval, coolant, electrical setup, work material, and operating procedure before any wet process.
Will this fit every 6-inch edge sander?
No. The machine must require both a 6-inch width and 132-inch loop plus compatible backing, joint, direction, tension, tracking, speed, and operating requirements.
What are the shipping and return terms?
Shipping methods, rates, and delivery estimates depend on the order and destination and are shown at checkout. The return policy provides a 30-day window for eligible unused items in original condition and packaging. Restrictions and return-shipping costs apply.
READY TO CHOOSE?
Confirm 6" × 132", then choose grain and grit
Select one of the 28 live two-pack variants and review its current price and availability.
